9.5 HP P4000 SAN/iQ Command-Line Interface User Guide (AX696-96069, September 2011)

HP P4000 CLI|Commands|25

createCluster

This command creates a cluster in a management group.

Availability: Windows, SAN/iQ

Version: 8.0

Request Syntax

cliq

createCluster login= userName= passWord= clusterName= description= useVip= node= vip=

userName Required The authentication user name for the storage system

passWord Required The password for the storage system

keyFile Required The encrypted key file (this is specified instead of the username and password

parameters)

clusterName Required The name of the cluster

node Required The host names of the storage systems the cluster comprises

description Optional Optional description

useVip Optional Should virtual IP (VIP) addressing be used? This can be one of: 0, 1 - default

vip Optional A delimited list of virtual IP address and subnet maskNote: since each VIP contains two

parameters, IP address and subnet mask, both must be specified in order, even if empty

Example

cliq createCluster login=10.0.1.3 userName=admin

passWord=secret clusterName=TheCluster description="My

shiny new cluster" useVip=1 node=10.1.2.4

vip=10.1.2.99;255.255.0.0;;150.215.017.009;255.255.240.0;

cliq createCluster clusterName=TheCluster description="My

shiny new cluster" useVip=1 node=10.1.2.4

vip=10.1.2.99;255.255.0.0;;150.215.017.009;255.255.240.0;

createEmailNotifyPolicy

This command creates an Email Notification Policy.

Availability: Windows, SAN/iQ

Version: 9.0

Request Syntax

cliq createEmailNotifyPolicy login= userName= passWord= emailAddress= verbosity=

userName Required The authentication user name for the storage system

passWord Required The password for the storage system

keyFile Required The encrypted key file (this is specified instead of the username and password

parameters)

emailAddress Required The notification email.

verbosity Required The level of returned information via email notification. 1 - brief, 2 - standard, 3 -

verbose

severities Optional