Manualshelf

9.5 HP P4000 SAN/iQ Command-Line Interface User Guide (AX696-96069, September 2011)

ManualsBrandsHP ManualsStorageHP P4300 G2 16TB MDL SAS Starter China SAN Solution
31323334353637383940
HP P4000 CLI|Commands|35
Example
cliq deleteAdminUser login=10.0.1.3 userName=admin passWord=secret
adminUserName=user
cliq deleteAdminUser adminUserName=user
deleteCluster
This command deletes a cluster. All storage systems are removed.
Availability: Windows, SAN/iQ
Version: 8.0
Request Syntax
cliq deleteCluster clusterName= login= userName= passWord=
login Required The IP address or DNS-resolvable names of one or more storage systems
userName Required The authentication user name for the storage system
passWord Required The password for the storage system
keyFile Required The encrypted key file (this is specified instead of the username and password
parameters)
clusterName Required The name of the cluster
Example
cliq deleteCluster clusterName=TheCluster login=10.1.2.3
userName=admin passWord=secret
cliq deleteCluster clusterName=TheCluster
deleteEmailNotifyPolicy
This command deletes an Email Notification Policy.
Availability: Windows, SAN/iQ
Version: 9.0
Request Syntax
cliq deleteEmailNotifyPolicy emailAddress= login= userName= passWord=
login Required The IP address or DNS-resolvable names of one or more storage systems
userName Required The authentication user name for the storage system
passWord Required The password for the storage system
keyFile Required The encrypted key file (this is specified instead of the username and password
parameters)
emailAddress Required The notification email.