9.5 HP P4000 SAN/iQ Command-Line Interface User Guide (AX696-96069, September 2011)

36|HP P4000 CLI|Commands
Example
cliq deleteEmailNotifyPolicy emailAddress=[e-mail]
login=10.1.2.3 userName=admin passWord=secret
cliq deleteEmailNotifyPolicy emailAddress=[e-mail]
deleteGroup
This command deletes a management group. All storage systems are removed.
Availability: Windows, SAN/iQ
Version: 8.0
Request Syntax
cliq deleteGroup groupName= login= userName= passWord=
login Required The IP address or DNS-resolvable names of one or more storage systems
userName Required The authentication user name for the storage system
passWord Required The password for the storage system
keyFile Required The encrypted key file (this is specified instead of the username and password
parameters)
groupName Required The name of the group
Example
cliq deleteGroup groupName=TheGroup login=10.1.2.3 userName=admin
passWord=secret
cliq deleteGroup groupName=TheGroup
deleteRemoteAssociation
This command deletes a remote group to primary group association.
Availability: Windows, SAN/iQ
Version: 8.0
Request Syntax
cliq
deleteRemoteAssociation login= userName= passWord= remote= remoteUserName= remotePassWord=
login Required The IP address or DNS-resolvable names of one or more storage systems
userName Required The authentication user name for the storage system
passWord Required The password for the storage system
keyFile Required The encrypted key file (this is specified instead of the username and password
parameters)
remote Required The IP address or DNS-resolvable names of one or more remote storage system
remoteUserName Required The authentication user name for the remote group
remotePassWord Required The password for the remote group
remoteKeyFile Required The encrypted key file for the remote group (this is specified instead of the
remoteusername and remotepassword parameters)