Manualshelf

9.5 HP P4000 SAN/iQ Command-Line Interface User Guide (AX696-96069, September 2011)

ManualsBrandsHP ManualsStorageHP P4300 G2 16TB MDL SAS Starter China SAN Solution
31323334353637383940
38|HP P4000 CLI|Commands
Example
cliq deleteSite siteName=Headquarters login=10.1.2.3 userName=admin
passWord=secret
cliq deleteSite siteName=Headquarters
deleteSnapshot
This command deletes a snapshot.
Availability: Windows, SAN/iQ
Version: 8.0
Request Syntax
cliq deleteSnapshot snapshotName= login= userName= passWord=
login Required The IP address or DNS-resolvable names of one or more storage systems
userName Required The authentication user name for the storage system
passWord Required The password for the storage system
keyFile Required The encrypted key file (this is specified instead of the username and password
parameters)
snapshotName Required The name of the remote snapshot
Example
cliq deleteSnapshot snapshotName=Snapshot0 login=10.1.2.3
userName=admin passWord=secret
cliq deleteSnapshot snapshotName=Snapshot0
deleteSnapshotSchedule
This command deletes a previously created snapshot schedule.
Availability: Windows, SAN/iQ
Version: 9.0
Request Syntax
cliq deleteSnapshotSchedule scheduleName= login= userName= passWord=
login Required The IP address or DNS-resolvable names of one or more storage systems
userName Required The authentication user name for the storage system
passWord Required The password for the storage system
keyFile Required The encrypted key file (this is specified instead of the username and password
parameters)
scheduleName Required The name of the schedule