9.5 HP P4000 SAN/iQ Command-Line Interface User Guide (AX696-96069, September 2011)

HP P4000 CLI|Commands|43

groupOrder Optional Return storage systems ordered by group membership. This can be one of: 0 - default, 1

receivePort Optional The TCP port to receive the discovery packets (defaults to an unused port if unspecified)

waitForData Optional The number of milliseconds to wait for the discovery packets (defaults to 3000 if

unspecified)

Example

cliq discoverUdp ipMask=255.255.240.0 ipSubnet=10.0.0.0

getAlertLog

This command returns Alerts.log information.

Availability: Windows

Version: 8.5

Request Syntax

cliq getAlertLog login= userName= passWord=

userName Required The authentication user name for the storage system

passWord Required The password for the storage system

keyFile Required The encrypted key file (this is specified instead of the username and password

parameters)

Example

cliq getAlertLog login=10.1.2.3 userName=admin passWord=secret

cliq getAlertLog

getClusterInfo

This command returns information about a cluster.

Availability: Windows, SAN/iQ

Version: 8.0

Request Syntax

cliq getClusterInfo clusterName= login= userName= passWord=

userName Required The authentication user name for the storage system

passWord Required The password for the storage system

keyFile Required The encrypted key file (this is specified instead of the username and password

parameters)

clusterName Optional The name of the cluster

searchDepth Optional Which objects to inspect 1 - Clusters only, 2 - Clusters and volumes, 3 - Clusters,

volumes and snapshots, 4 - Clusters, volumes, snapshots and remote snapshots (default)

verbose Optional How much information to return 0 - Get summary information only (better performance),

1 - Get all information (better information - default)