9.5 HP P4000 SAN/iQ Command-Line Interface User Guide (AX696-96069, September 2011)

44|HP P4000 CLI|Commands
Example
cliq getClusterInfo clusterName=Cluster0 login=10.1.2.3
userName=admin passWord=secret
cliq getClusterInfo clusterName=Cluster0
getDnsInfo
This command gets the DNS settings.
Availability: Windows, SAN/iQ
Version: 9.0
Request Syntax
cliq getDnsInfo login= userName= passWord=
login Required The IP address or DNS-resolvable names of one or more storage systems
userName Required The authentication user name for the storage system
passWord Required The password for the storage system
keyFile Required The encrypted key file (this is specified instead of the username and password
parameters)
Example
cliq getDnsInfo login=10.0.1.3 userName=admin passWord=secret
cliq getDnsInfo
getEventLog
This command returns event information.
Availability: Windows, SAN/iQ
Version: 9.0
Request Syntax
cliq getEventLog login= userName= passWord= type= format= verbosity=
login Required The IP address or DNS-resolvable names of one or more storage systems
userName Required The authentication user name for the storage system
passWord Required The password for the storage system
keyFile Required The encrypted key file (this is specified instead of the username and password
parameters)
type Optional Event type. This can be one of: AllAlerts, AllEvents, GlobalAlerts, GlobalEvents,
LocalAlerts, LocalEvents
format Optional Output format. This can be one of: Remote, Client, Xml
report Optional Output verbosity. This can be one of: Brief, Standard, Verbose
time Optional Time filter, format YYYYMMDDhhmmss:YYYYMMDDhhmmss
component Optional Component filter. This can be one or more of: Saniq, Hal, Sys
severity Optional Severity filter. This can be one or more of: Info, Warning, Critical
object Optional Object filter. This can be one or more of: MgmtGroup, RemoteMgmtGroup, Cluster,
Manager, VirtualManager, Store, SnapshotSchedule, Volume, Snapshot