9.5 HP P4000 SAN/iQ Command-Line Interface User Guide (AX696-96069, September 2011)

HP P4000 CLI|Commands|45
system Optional System filter. This can be one or more of: System, Controller, Cache, Disk, Boot,
Backplane, Fan, Temperature, Voltage, PowerSupply, RAID
source Optional Source filter, source name
user Optional The name of the administrative user
Example
cliq getEventLog login=10.1.2.3 userName=admin passWord=secret
type=AllEvents format=Xml verbosity=Standard
component=Saniq severity=warning;Critical object=Cluster
system=System;Disk
getGroupInfo
This command returns information about a management group.
Availability: Windows, SAN/iQ
Version: 8.0
Request Syntax
cliq getGroupInfo login= userName= passWord=
login Required The IP address or DNS-resolvable names of one or more storage systems
userName Required The authentication user name for the storage system
passWord Required The password for the storage system
keyFile Required The encrypted key file (this is specified instead of the username and password
parameters)
searchDepth Optional Which objects to inspect 1 - Groups only, 2 - Groups and clusters, 3 - Groups, clusters
and volumes, 4 - Groups, clusters, volumes and snapshots, 5 - Groups, clusters,
volumes, snapshots and remote snapshots (default)
verbose Optional How much information to return 0 - Get summary information only (better performance),
1 - Get all information (better information - default)
Example
cliq getGroupInfo login=10.1.2.3 userName=admin passWord=secret
cliq getGroupInfo
getLocalVolumes
This command returns information about connected volumes hosted by the HP P4000 array.
Availability: Windows
Version: 8.0
Request Syntax
cliq getLocalVolumes