9.5 HP P4000 SAN/iQ Command-Line Interface User Guide (AX696-96069, September 2011)

HP P4000 CLI|Commands|47
getNsmLogs
This command gathers all log files from a storage system and stores the archive locally.
Availability: Windows
Version: 8.0
Request Syntax
cliq getNsmLogs login= userName= passWord= logFile=
login Required The IP address or DNS-resolvable names of one or more storage systems
userName Required The authentication user name for the storage system
passWord Required The password for the storage system
keyFile Required The encrypted key file (this is specified instead of the username and password
parameters)
logFile Required The name of the local file for the log archive
Example
cliq getNsmLogs login=10.1.2.3 userName=admin passWord=secret
logFile=c:\logs.tar.gz
getPerformanceStats
This command returns performance monitoring statistics.
Availability: Windows, SAN/iQ
Version: 8.0
Request Syntax
cliq getPerformanceStats login= userName= passWord=
login Required The IP address or DNS-resolvable names of one or more storage systems
userName Required The authentication user name for the storage system
passWord Required The password for the storage system
keyFile Required The encrypted key file (this is specified instead of the username and password
parameters)
interval Optional The interval in between counter sampling in milliseconds. Defaults to 6000.Note:
Because the internal sampling frequency is 6 seconds, it's not recommended to set this
value less than 6000
Example
cliq getPerformanceStats login=10.1.2.3 userName=admin
passWord=secret
cliq getPerformanceStats