9.5 HP P4000 SAN/iQ Command-Line Interface User Guide (AX696-96069, September 2011)

HP P4000 CLI|Commands|51
getServerVolumeInfo
This command returns the features of a volume by interrogating a remote server. This will return VSS
associated volumes.
Availability: Windows, SAN/iQ
Version: 8.5
Request Syntax
cliq getServerVolumeInfo login= userName= passWord=
login Required The IP address or DNS-resolvable names of one or more storage systems
userName Required The authentication user name for the storage system
passWord Required The password for the storage system
keyFile Required The encrypted key file (this is specified instead of the username and password
parameters)
serverIp Optional The Windows server IP address.
Example
cliq getServerVolumeInfo login=10.0.1.2 userName=admin
passWord=secret
cliq getServerVolumeInfo
getSiteInfo
This command returns site information on multi-site SANs.
Availability: Windows, SAN/iQ
Version: 8.0
Request Syntax
cliq getSiteInfo siteName= login= userName= passWord=
login Required The IP address or DNS-resolvable names of one or more storage systems
userName Required The authentication user name for the storage system
passWord Required The password for the storage system
keyFile Required The encrypted key file (this is specified instead of the username and password
parameters)
siteName Optional The name of the site
Example
cliq getSiteInfo siteName=TheSite login=10.1.2.3 userName=admin
passWord=secret
cliq getSiteInfo siteName=TheSite