9.5 HP P4000 SAN/iQ Command-Line Interface User Guide (AX696-96069, September 2011)

52|HP P4000 CLI|Commands
getSnapshotInfo
This command returns information about a snapshot.
Availability: Windows, SAN/iQ
Version: 8.0
Request Syntax
cliq getSnapshotInfo snapshotName= login= userName= passWord=
login Required The IP address or DNS-resolvable names of one or more storage systems
userName Required The authentication user name for the storage system
passWord Required The password for the storage system
keyFile Required The encrypted key file (this is specified instead of the username and password
parameters)
snapshotName Optional The name of the remote snapshot
searchDepth Optional Which objects to inspect 1 - Snapshots only, 2 - Snapshots and remote snapshots
(default)
verbose Optional How much information to return 0 - Get summary information only (better performance),
1 - Get all information (better information - default)
Example
cliq getSnapshotInfo snapshotName=TheSnapshot login=10.1.2.3
userName=admin passWord=secret
cliq getSnapshotInfo snapshotName=TheSnapshot
getSnapshotScheduleInfo
This command returns information about snapshot schedules.
Availability: Windows, SAN/iQ
Version: 9.0
Request Syntax
cliq getSnapshotScheduleInfo login= userName= passWord=
login Required The IP address or DNS-resolvable names of one or more storage systems
userName Required The authentication user name for the storage system
passWord Required The password for the storage system
keyFile Required The encrypted key file (this is specified instead of the username and password
parameters)
scheduleName Optional The name of the schedule
Example
cliq getSnapshotScheduleInfo login=10.0.1.3 userName=admin
passWord=secret
cliq getSnapshotScheduleInfo