9.5 HP P4000 SAN/iQ Command-Line Interface User Guide (AX696-96069, September 2011)

HP P4000 CLI|Commands|53
getSnmpInfo
This command returns information about the SNMP Service and Targets.
Availability: Windows, SAN/iQ
Version: 9.0
Request Syntax
cliq getSnmpInfo login= userName= passWord=
login Required The IP address or DNS-resolvable names of one or more storage systems
userName Required The authentication user name for the storage system
passWord Required The password for the storage system
keyFile Required The encrypted key file (this is specified instead of the username and password
parameters)
Example
cliq getSnmpInfo login=10.1.2.3 userName=admin passWord=secret
cliq getSnmpInfo
getSupportInfo
This command gathers all support log files from a management group and all its member storage systems.
If the specified storage system does not belong to any management group, then only logs from the storage
system will be collected. This command stores the archive locally.
Availability: Windows
Version: 8.5
Request Syntax
cliq getSupportInfo login= userName= passWord= filepath=
login Required The IP address or DNS-resolvable names of one or more storage systems
userName Required The authentication user name for the storage system
passWord Required The password for the storage system
keyFile Required The encrypted key file (this is specified instead of the username and password
parameters)
filepath Optional The path to hold the final archive, if not specified, the current directory will be used.
Example
cliq getSupportInfo login=10.1.2.3 userName=admin passWord=secret
filepath=c:\temp
getSystemInfo
This command returns version information about the API, and other dependent libraries.
Availability: Windows, SAN/iQ