9.5 HP P4000 SAN/iQ Command-Line Interface User Guide (AX696-96069, September 2011)

HP P4000 CLI|Commands|61

chapName Optional The CHAP name for the volume. If this is not specified, the IQN of the local server is

used (this parameter is required if run on a storage system).

targetSecret Optional The CHAP target secret for the volume.

initiatorSecret Optional The CHAP initiator secret for the volume.

Example

cliq modifyServer serverName=TheServer useChap=0

initiator=iqn.1991-05.com.microsoft:w-

gregorio.corp.lefthandnetworks.com login=10.0.1.2 userName=admin

passWord=secret

cliq modifyServer serverName=TheServer useChap=0

initiator=iqn.1991-05.com.microsoft:w-

gregorio.corp.lefthandnetworks.com

modifySite

This command modifies a site in a multi-site SAN.

Availability: Windows, SAN/iQ

Version: 8.0

Request Syntax

cliq modifySite siteName= description= login= userName= passWord=

userName Required The authentication user name for the storage system

passWord Required The password for the storage system

keyFile Required The encrypted key file (this is specified instead of the username and password

parameters)

siteName Required The name of the site

node Optional The host names of the storage systems the cluster comprises

description Optional Optional description

primary Optional This site is the primary site. This can be one of: 0, 1 - default

Example

cliq modifySite siteName=TheSite description="My Site" login=10.0.1.2

userName=admin passWord=secret

cliq modifySite siteName=TheSite description="My Site"

modifySnapshot

This command modifies snapshot settings.

Availability: Windows, SAN/iQ

Version: 8.0

Request Syntax

cliq modifySnapshot description= login= userName= passWord= snapshotName=