9.5 HP P4000 SAN/iQ Command-Line Interface User Guide (AX696-96069, September 2011)
HP P4000 CLI|Commands|67
passWord Required The password for the storage system
keyFile Required The encrypted key file (this is specified instead of the username and password
parameters)
volumeName Required The name of the volume
Example
cliq rebalanceVip volumeName=MyVolume login=10.1.2.3 userName=admin
passWord=secret
cliq rebalanceVip volumeName=MyVolume
recoverQuorum
This command is used to rescue a management group after quorum has been irretrievably lost. This
command needs to be run on a storage system with a working manager so it can retrieve the management
group database from that manager to restore the management group.WARNING: Once you have chosen
to proceed with the recover quorum operation, there is no way to undo the effects. If possible, it is highly
recommended that you attempt to recover quorum instead by bringing up any offline managers that might
still be accessible. As part of the recover quorum operation, all configured managers that are offline will
be deleted from the management group and all storage servers that are offline will be ejected from the
management group and cluster(s).
Availability: Windows, SAN/iQ
Version: 8.0
Request Syntax
cliq recoverQuorom login= userName= passWord=
login Required The IP address or DNS-resolvable names of one or more storage systems
userName Required The authentication user name for the storage system
passWord Required The password for the storage system
keyFile Required The encrypted key file (this is specified instead of the username and password
parameters)
Example
cliq recoverQuorom login=10.1.2.3 userName=admin passWord=secret
cliq recoverQuorum
removeSnapshot
This command disconnects a SAN snapshot from the host, then deletes it. If the snapshot cannot be
disconnected (because it's in use, or for any other reason), it will not be deleted.
Availability: Windows
Version: 8.5
Request Syntax
cliq removeSnapshot snapshotName= login= userName= passWord=
login Required The IP address or DNS-resolvable names of one or more storage systems
userName Required The authentication user name for the storage system