9.5 HP P4000 SAN/iQ Command-Line Interface User Guide (AX696-96069, September 2011)

74|HP P4000 CLI|Commands
Version: 8.0
Request Syntax
cliq shutdownGroup login= userName= passWord=
login Required The IP address or DNS-resolvable names of one or more storage systems
userName Required The authentication user name for the storage system
passWord Required The password for the storage system
keyFile Required The encrypted key file (this is specified instead of the username and password
parameters)
Example
cliq shutdownGroup login=10.0.1.2 userName=admin passWord=secret
cliq shutdownGroup
shutdownNsm
This command shuts down a storage system.
Availability: Windows, SAN/iQ
Version: 8.0
Request Syntax
cliq shutdownNsm action= delay= login= userName= passWord=
login Required The IP address or DNS-resolvable names of one or more storage systems
userName Required The authentication user name for the storage system
passWord Required The password for the storage system
keyFile Required The encrypted key file (this is specified instead of the username and password
parameters)
action Required The operation to perform. This can be one of: Shutdown - powers off the storage system,
Restart - reboots the storage system, Cancel - cancels a restart or shutdown if pending
delay Optional The number of minutes to delay prior to shutdown or restart (defaults to 0)
Example
cliq shutdownNsm action=Restart delay=10 login=10.0.1.2
userName=admin passWord=secret
cliq shutdownNsm action=Restart delay=10
startManager
This command starts the manager on a storage system.
Availability: Windows, SAN/iQ
Version: 8.0
Request Syntax
cliq startManager login= userName= passWord=
login Required The IP address or DNS-resolvable names of one or more storage systems