9.5 HP P4000 SAN/iQ Command-Line Interface User Guide (AX696-96069, September 2011)

HP P4000 CLI|Commands|75
userName Required The authentication user name for the storage system
passWord Required The password for the storage system
keyFile Required The encrypted key file (this is specified instead of the username and password
parameters)
Example
cliq startManager login=10.0.1.2 userName=admin passWord=secret
cliq startManager
startSnmpService
This command starts the SNMP Service.
Availability: Windows, SAN/iQ
Version: 9.0
Request Syntax
cliq startSnmpService login= userName= passWord=
login Required The IP address or DNS-resolvable names of one or more storage systems
userName Required The authentication user name for the storage system
passWord Required The password for the storage system
keyFile Required The encrypted key file (this is specified instead of the username and password
parameters)
Example
cliq startSnmpService login=10.0.1.2 userName=admin passWord=secret
cliq startSnmpService
startVirtualManager
This command starts a virtual manager on a storage system.
Availability: Windows, SAN/iQ
Version: 8.0
Request Syntax
cliq startVirtualManager login= userName= passWord=
login Required The IP address or DNS-resolvable names of one or more storage systems
userName Required The authentication user name for the storage system
passWord Required The password for the storage system
keyFile Required The encrypted key file (this is specified instead of the username and password
parameters)