9.5 HP P4000 SAN/iQ Command-Line Interface User Guide (AX696-96069, September 2011)

HP P4000 CLI|Commands|77
stopVirtualManager
This command stops a virtual manager on a storage system.
Availability: Windows, SAN/iQ
Version: 8.0
Request Syntax
cliq stopVirtualManager login= userName= passWord=
login Required The IP address or DNS-resolvable names of one or more storage systems
userName Required The authentication user name for the storage system
passWord Required The password for the storage system
keyFile Required The encrypted key file (this is specified instead of the username and password
parameters)
Example
cliq stopVirtualManager login=10.0.1.2 userName=admin passWord=secret
cliq stopVirtualManager
testCredentials
This command tests the login credentials for a management group.
Availability: Windows, SAN/iQ
Version: 8.0
Request Syntax
cliq testCredentials login= userName= passWord=
login Required The IP address or DNS-resolvable names of one or more storage systems
userName Required The authentication user name for the storage system
passWord Required The password for the storage system
keyFile Required The encrypted key file (this is specified instead of the username and password
parameters)
groupName Required The name of the group
Example
cliq testCredentials login=10.0.1.2 userName=admin passWord=secret
cliq testCredentials
unassignVolume
This command disassociates a volume from all servers.
Availability: Windows, SAN/iQ
Version: 8.0