9.5 HP P4000 SAN/iQ Command-Line Interface User Guide (AX696-96069, September 2011)
80|HP P4000 CLI|Commands
description Optional Optional description
Example
cliq vssSnapshot volumeName=y:;z:
waitForEvent
This command waits for an alert or event message.
Availability: Windows, SAN/iQ
Version: 9.0
Request Syntax
cliq waitForEvent login= userName= passWord=
login Required The IP address or DNS-resolvable names of one or more storage systems
userName Required The authentication user name for the storage system
passWord Required The password for the storage system
keyFile Required The encrypted key file (this is specified instead of the username and password
parameters)
receivePort Optional The TCP port to receive the discovery packets (defaults to an unused port if unspecified)
Example
cliq waitForEvent login=10.0.1.2 userName=admin passWord=secret
cliq waitForEvent
waitForUpdate
This command will block on a change to the state in the management group.
Availability: Windows, SAN/iQ
Version: 8.0
Request Syntax
cliq waitForUpdate login= userName= passWord=
login Required The IP address or DNS-resolvable names of one or more storage systems
userName Required The authentication user name for the storage system
passWord Required The password for the storage system
keyFile Required The encrypted key file (this is specified instead of the username and password
parameters)
receivePort Optional The TCP port to receive the discovery packets (defaults to an unused port if unspecified)
Example
cliq waitForUpdate login=10.1.2.3 userName=admin passWord=secret
cliq waitForUpdate