HP StorageWorks P4000 G2 Unified NAS Gateway User Guide (5697-0624, November 2010)

Figure 6 P4000 G2 Unified NAS Gateway connections
.
1. Client network
2. Standard IP switch
3. P4000 G2 Unified NAS Gateway nodes
4. Standard IP switches
5. P4000 SAN segment
For proper operation of the cluster, each storage server requires the following: a private heartbeat
network connection between the two servers, at least one private network connection to a P4000
SAN, and at least one connection for file serving purposes, which can be configured as a public or
private network connection based on your network infrastructure needs. The private connection NIC
adapters must be set with static IP addresses; the public NIC adapters can be set with a static IP
address, or may be automatically configured using DHCP. If a DHCP server is available on your
network, HP recommends allowing DHCP to automatically configure the public-facing network
connections; this is the default setting.
1. Log in to the Server 1 desktop as a user with Administrative privileges.
2. Click Close to dismiss the HP StorageWorks Rapid Startup Wizard.
3. In Server Manager, click View Network Connections.
If Server Manager is not already open, click Start > Administrative Tools > Server Manager.
P4000 G2 Unified NAS Gateway User Guide 27