11.0 HP StoreVirtual Storage Upgrade Guide (AX696-96330, September 2013)

1. Select Click here to stay at current software version.
2. Select Only notify me of patches available for my current version of software.
3. Click OK.
After setting these options, you will only receive notifications for patches for the LeftHand OS
version you are using.
Continue using an earlier CMC version to manage an earlier LeftHand OS version
To prevent a CMC upgrade and continue running an earlier version:
1. Start the CMC.
2. Open the Upgrades tab and do the following:
a. Select Click here to stay at the current software version.
b. Select Only notify me of patches available for my current version of software.
c. Click OK.
After setting these options, you will only receive notifications for patches for the LeftHand OS
version you are using. You must renew this setting every 30 days.
Upgrading the CLI
NOTE: Ensure that you have Administrator privileges before starting the upgrade.
1. Start the CMC.
2. Select Configuration Summary and select the Upgrades tab.
3. Click Continue next to the storage system for which the HP StoreVirtual LeftHand OS Command
Line Interface is listed.
4. When the Upgrade window opens, the location of the downloaded CLI executable is displayed.
Use Windows Explorer to navigate to the directory where the CLI executable was downloaded
and then double-click the executable to start the wizard.
The installation wizard opens.
5. Follow the instructions on the installation wizard to complete the upgrade.
Upgrading the HP StoreVirtual DSM for Microsoft MPIO
NOTE: Ensure that you have Administrator privileges before starting the upgrade.
If you are running a version earlier than 9.0, you must upgrade to Version 9.0 first and then use
the HP StoreVirtual Application Integration Solution Pack installer to upgrade to the current version:
• If you are running Version 7.x of the DSM for MPIO:
Uninstall the previous version of the DSM for MPIO.1.
2. Reboot the server.
3. Download and install the latest version of the MS iSCSI Initiator. You must select the
Microsoft MPIO Multipathing Support for iSCSI option when installing the Microsoft iSCSI
Initiator.
4. Install Version 9.0 of the DSM for MPIO.
• If you are running Version 8.0 or 8.1 of the DSM for MPIO, use the HP StoreVirtual Application
Integration Solution Pack DVD to upgrade to Version 9.0.
1. Start the CMC.
2. Select Configuration Summary and select the Upgrades tab.
3. Click Continue next to the storage system for which the DSM for MPIO is listed.
Completing the upgrade 9