11.0 HP StoreVirtual Storage VSA Installation and Configuration Guide (TA688-96141, September 2013)

Confidential computer software. Valid license from HP required for possession, use or copying. Consistent with FAR 12.211 and 12.212, Commercial

Computer Software, Computer Software Documentation, and Technical Data for Commercial Items are licensed to the U.S. Government under

vendor's standard commercial license.

The information contained herein is subject to change without notice. The only warranties for HP products and services are set forth in the express

warranty statements accompanying such products and services. Nothing herein should be construed as constituting an additional warranty. HP shall

not be liable for technical or editorial errors or omissions contained herein.

Acknowledgements

Microsoft®, Windows®, Windows® XP, and Windows NT® are U.S. registered trademarks of Microsoft Corporation.

Revision History

September 2010Revision 1

First edition

November 2010Revision 2

Updated with changes for the SAN/iQ software 9.0 release.

September 2011Revision 3

Updated with changes for the SAN/iQ software 9.5 release, including new installer for VSA for vSphere Server.

December 2011Revision 4

Updated with changes for the installer for VSA to vSphere Server, for the SAN/iQ software 9.5 release.

November 2012Revision 5

Updated for the SAN/iQ software 10.0 release. Updated memory requirements, removed Jumbo Frames and 10 Gb/s as being not supported

with virtual NICs, increased virtual CPU prerequisite for VSA for Hyper-V installation from one to two.

March 2013Revision 6

Updated with new product branding for the LeftHand OS software 10.5 release.

September 2013Revision 7

Updated with the new HP StoreVirtual VSA and LeftHand OS 11.0 functionality, including tiered storage, updated memory requirements, licensing

options, and number and size of disks supported.