11.0 HP StoreVirtual LeftHand OS Command Line Interface User Guide (AX696-96291, September 2013)

Example 239 Windows
cliq unassignVolumeToServer volumeName=TheVolume serverName=TheServer
login=10.0.1.2 userName=admin passWord=secret
Example 240 SSH
unassignVolumeToServer volumeName=TheVolume serverName=TheServer
utility
Description
Execute a utility program on a storage system.
CAUTION: This command is recommended for HP support only.
Syntax
utility {login=} { userName= passWord= | groupName= } [run=] [logFile=]
[useZip=]
Parameters
DescriptionName
The IP addresses or DNS-resolvable names of one or more storage systems.{login}
The authentication user name for the storage system. If you use this parameter,
you must include the passWord parameter with it. Or, you can use the
groupName parameter instead of userName and passWord.
{userName}
The name of the management group. Use this parameter if you do not use
the userName and passWord parameters. Because groupName has cached
credentials, it does not require the userName and passWord parameters.
{groupName}
The password for the storage system. Required when the userName
parameter is used.
{passWord}
The utility and parameters to execute on the storage system. If this parameter
is not specified, a list of possible commands is returned.
[run]
The name of the local file used to store the returned information.[logFile]
When used, the resulting log file will be zipped.[useZip]
116 Commands