11.0 HP StoreVirtual LeftHand OS Command Line Interface User Guide (AX696-96291, September 2013)

Example 185 Windows
cliq rebalanceVip volumeName=MyVolume login=10.1.2.3 userName=admin
passWord=secret
Example 186 SSH
rebalanceVip volumeName=MyVolume
recoverQuorum
Description
This command is used to rescue a management group after quorum has been irretrievably lost.
This command needs to be run on a storage system with a working manager so it can retrieve the
management group database from that manager to restore the management group.
CAUTION:
• Once you have chosen to proceed with the recover quorum operation, there is no way to
undo the effects. If possible, it is highly recommended that you attempt to recover quorum
instead by bringing up any offline managers that might still be accessible. As part of the
recover quorum operation, all configured managers that are offline will be deleted from the
management group and all storage servers that are offline will be ejected from the management
group and cluster(s).
• Contact support before proceeding. Only use the recoverQuorum command when actively
working with support personnel and they direct you to invoke the command.
• This command will display a prompt, requiring confirmation before proceeding. This prompt
may be overridden with an optional prompt=0 parameter on the command line; in this case,
the command will always execute without pausing for confirmation.
Syntax
recoverQuorum {login=} { userName= passWord= | groupName= }
Parameters
DescriptionName
The IP addresses or DNS-resolvable names of one or more storage systems.{login}
The authentication user name for the storage system. If you use this parameter,
you must include the passWord parameter with it. Or, you can use the
groupName parameter instead of userName and passWord.
{userName}
The name of the management group. Use this parameter if you do not use
the userName and passWord parameters. Because groupName has cached
credentials, it does not require the userName and passWord parameters.
{groupName}
The password for the storage system. Required when the userName
parameter is used.
{passWord}
96 Commands