10.5 HP StoreVirtual LeftHand OS Command Line Interface User Guide (AX696-96242, March 2013)
84| HP StoreVirtual CLI| Commands
passWord Conditional The password for the storage system. (Parameters userName/passWord
or groupName must be specified).
groupName Conditional The name of the management group with cached credentials.
(Parameters userName/passWord or groupName must be specified).
clusterName Required The name of the cluster
volumeName Required The name of the volume
size Required The size of the volume, with units specified: <n>MB - n Megabytes
(1024 Kilobytes), <n>GB - n Gigabytes (1024 Megabytes), <n>TB - n
Terabytes (1024 Gigabytes)
description Optional Optional description
replication Optional The replication level for the volume (1|2|3|4)
parity Optional The number of parity storage systems for the data on this volume. This
enables parity network RAID on the volume. Replication and parity
are supported in the following combinations: replication:1, parity:0
Network RAID-0 (None), replication:2, parity:0 Network RAID-10
(2-way Mirror), replication:3, parity:0 Network RAID-10+1 (3-way
Mirror), replication:4, parity:0 Network RAID-10+2 (4-way Mirror),
replication:2, parity:1 Network RAID-5 (Single parity), replication:3,
parity:2 Network RAID-6 (Dual Parity)
checkSum Optional 0 - the volume does not use checksums1 - the volume uses checksums
thinProvision Optional 0 = the volume does not use thin-provisioning, 1 = The volume is thin-
provisioned (in a thinly provisioned volume, reserve may be < length)
mountPoint Optional The drive letter or mount point on the host for the volume (LUN will be
uninitialized if not specified)
namePrefix Optional A prefix string for newly created objects. A unique number value will be
concatenated to this prefix to guarantee name uniqueness.
vipLoadBalance Optional Use VIP load balancing for this host. This can be one of: 0 = disabled
or 1 = enabled, 1 is the default.
targetSecret Optional The CHAP target secret for the volume.
chapName Optional The CHAP name for the volume. If this is not specified, the IQN of
the local server is used (this parameter is required if run on a storage
system).
initiatorSecret Optional The CHAP initiator secret for the volume.
Example
cliq provisionVolume clusterName=TheCluster volumeName=TheVolume
description=NewVolume size=100GB mountPoint=z: login=10.0.1.2
userName=admin passWord=secret
rebalanceVip
This command rebalances the connections to a volume when using a virtual IP address.
Availability: Windows, SSH
Version: 8.0
Request Syntax
cliq rebalanceVip volumeName= login= userName= passWord=
login Required The IP addresses or DNS-resolvable names of one or more storage
systems
userName Conditional The authentication user name for the storage system. (Parameters
userName/passWord or groupName must be specified).