HP StoreVirtual 4630 Storage Maintenance Guide (AX696-96343, December 2013)

2 Backing up HP 4630 system configurations
HP recommends that you back up all HP 4630 system components for safekeeping after initially
powering on the HP 4630 system, and immediately after making changes to an existing
configuration or replacing a component. You must back up each component (for example, the VC
Flex-10 module) separately.
Backing up or restoring the Virtual Connect domain configuration
Use the Virtual Connect Manager to back up the VC Flex-10 module configuration.
IMPORTANT: Virtual Connect Manager cannot use backup configurations created with previous
versions of Virtual Connect Manager. For example, if you are currently using 2.01, you cannot
use a backup configuration that was created using 1.20.
1. From Onboard Administrator, go to the Virtual Connect Manager, Domain Settings
Backup/Restore pane.
2. Click Backup Configuration.
3. Click Save on File Download in the popup window.
4. Navigate to the hard drive location for the backup file.
5. Name the file (usually the domain name), and then click Save.
To restore a domain configuration:
IMPORTANT: You must power off all storage blades in the chassis before restoring the
configuration.
1. Browse to the backup file.
2. Select the file.
Backing up or restoring the Virtual Connect domain configuration 11