11.0 HP StoreVirtual LeftHand OS Command Line Interface User Guide (AX696-96291, September 2013)

DescriptionName
The password for the storage system. Required when the userName
parameter is used.
{passWord}
The aging in months.{aging}
Example 199 Windows
cliq setAlertsPolicy login=10.0.1.3 userName=admin passWord=secret
aging="2"
Example 200 SSH
setAlertsPolicy aging="2"
setAutoMountPolicy
Description
Set or modify the auto-mount policy or the mount location for auto-mount policies for the HP
StoreVirtual Recovery Manager application on this computer.
CAUTION: The HP StoreVirtual Recovery Manager must be installed on the system to implement
auto-mount polices defined by the CLIQ.
Syntax
setAutoMountPolicy [groupName=] [volumeName=] [retentionCount=] [mountPoint=]
[paused=]
Parameters
DescriptionName
The name of the management group[groupName]
The name of the volume in the management group.[volumeName]
The number of snapshots to keep mounted for the specified volume of the
auto-mount policy. This parameter is required when configuring the auto-mount
policy.
[retentionCount]
Set the mount location on the host for where snapshots are mounted by the
HP StoreVirtual Auto-Mount service. This parameter is not required when
configuring an auto-mount policy.
[mountPoint]
The state of the snapshot schedule. Values are 0—Schedule is not paused
and 1—Schedule is paused.
[paused]
102 Commands