11.0 HP StoreVirtual LeftHand OS Command Line Interface User Guide (AX696-96291, September 2013)

Syntax
setSupportLogin {login=} { userName= passWord= | groupName= } {enabled=}
Parameters
DescriptionName
The IP addresses or DNS-resolvable names of one or more storage systems.{login}
The authentication user name for the storage system. If you use this parameter,
you must include the passWord parameter with it. Or, you can use the
groupName parameter instead of userName and passWord.
{userName}
The name of the management group. Use this parameter if you do not use
the userName and passWord parameters. Because groupName has cached
credentials, it does not require the userName and passWord parameters.
{groupName}
The password for the storage system. Required when the userName
parameter is used.
{passWord}
Enable or disable the feature. Values are 0—Disable and 1—Enable.{enabled=}
Example 215 Windows
cliq setSupportLogin enabled=1 login=10.0.1.3 userName=admin
passWord=secret
Example 216 SSH
setSupportLogin enabled=1
setTraceOff
Description
Stop the support logging for the current CLIQ process instance. This change is not shared or
persistent between CLIQ instances.
Syntax
setTraceOff
Parameters
None
Example 217 Windows or SSH
cliq setTraceOff
setTraceOn
Description
Start the support logging for the current CLIQ process instance. This change is not shared or
persistent between CLIQ instances.
Syntax
setTraceOn
108 Commands