11.0 HP StoreVirtual LeftHand OS Command Line Interface User Guide (AX696-96291, September 2013)

DescriptionName
Custom command executed after shadow creation, import or between break
and make-it-write.
[runCommand]
Transportable VSS snapshot import.[importShadow]
Expose the shadow copy as a mount point or drive letter. The format is
mountShadow="<GUID>;<mountOrDrive>".
[mountShadow]
Break the shadow copy set.[breakShadowCopies]
Mask the shadow copy LUN from the host. It works in conjunction with
breakShadowCopies and is valid only when breakShadowCopies is
specified (Windows 2008 only).
[maskLun]
The name of the remote snapshot.[snapshotName]
The authentication user name for the storage system. If you use this parameter,
you must include the passWord parameter with it. Or, you can use the
groupName parameter instead of userName and passWord.
{userName}
The password for the storage system. Required when the userName
parameter is used.
{passWord}
Optional description[description]
Example 243 Windows
cliq vsssnapshot persistent=1 transportable=1 volumename=Vol1
snapshotname=Vol1_Snapshot inheritaccess=1 description="My Snap"
backupdoc="C:\Users\admin\AppData\Local\Temp\lhn2D96.tmp"
waitForEvent
Description
Wait for an alert or event message.
Syntax
waitForEvent {login=} { userName= passWord= | groupName= } [receivePort=]
[timetowait=]
Parameters
DescriptionName
The IP addresses or DNS-resolvable names of one or more storage systems.{login}
The authentication user name for the storage system. If you use this parameter,
you must include the passWord parameter with it. Or, you can use the
groupName parameter instead of userName and passWord.
{userName}
The name of the management group. Use this parameter if you do not use
the userName and passWord parameters. Because groupName has cached
credentials, it does not require the userName and passWord parameters.
{groupName}
The password for the storage system. Required when the userName
parameter is used.
{passWord}
The TCP port to receive the discovery packets (defaults to an unused port if
unspecified).
[receivePort]
The maximum amount of time to wait before timing out.[timetowait]
118 Commands