11.0 HP StoreVirtual LeftHand OS Command Line Interface User Guide (AX696-96291, September 2013)

DescriptionName

The access rights to the volume. Values are r—Read-only, x—No access,

and rw—Read-write (default).

[accessRights]

Set the communication path to iSCSI or Fibre Channel. Values are iSCSI and

FC. Lowercase is accepted.

[transport]

Set the LUN for the Fibre Channel attached volume. The value can be 1-255.

NOTE: LUN 255 is not supported by Microsoft Windows.

[lun]

Example 5 Windows

cliq assignVolumeToServer volumeName=TheVolume serverName=TheServer

Example 6 SSH

assignVolumeToServer volumeName=TheVolume serverName=TheServer

cacheCredentials

Description

Encrypt, cache, and associate the username/password with the management group name in the

registry. Thereafter, the management group name can be used instead of the username/password

for CLI command credentials. The credentials entered must have Full Administrator rights to the

management group.

NOTE: This command will test to verify that the credentials entered have full administrative rights

to the management group. If the login (IP address) is not provided, it will try to discover the

management group.

Syntax

cacheCredentials {userName=} {passWord=} {groupName=} [login=] [waitForData=]

Parameters

DescriptionName

The authentication user name for the storage system.{userName}

The password for the storage system.{passWord}

The name of the management group.{groupName}

The IP addresses or DNS-resolvable names of one or more storage systems.[login]

The number of milliseconds to wait for the discovery packets (the default is

5000ms if unspecified). On Windows, the default wait time can be adjusted

[waitForData]

by setting the DWORD registry value

HKLM\Software\HP\StoreVirtual\MaxDiscoverWaitTimeInSeconds.

18 Commands