11.0 HP StoreVirtual LeftHand OS Command Line Interface User Guide (AX696-96291, September 2013)

Parameters

DescriptionName

The name of the locally attached storage device (for example, E:). This is not

the name of the volume in the management group.

{volumeName}

Example 23 Windows

cliq clearVssVolumeFlags volumeName=x:

cloneSnapshot

Description

Create one or more SmartClone volumes from a StoreVirtual snapshot. These SmartClone volumes

have all the functionality of normal volumes.

Syntax

cloneSnapshot {login=} { userName= passWord= | groupName= } {snapshotName=}

{volumeName=} [description=]

Parameters

DescriptionName

The IP addresses or DNS-resolvable names of one or more storage systems.{login}

The authentication user name for the storage system. If you use this parameter,

you must include the passWord parameter with it. Or, you can use the

groupName parameter instead of userName and passWord.

{userName}

The name of the management group. Use this parameter if you do not use

the userName and passWord parameters. Because groupName has cached

credentials, it does not require the userName and passWord parameters.

{groupName}

The password for the storage system. Required when the userName

parameter is used.

{passWord}

The name of the remote snapshot.{snapshotName}

The name of the volume in the management group.{volumeName}

Optional description[description]

Example 24 Windows

cliq cloneSnapshot snapshotName=Snapshot1 volumeName=MyClone1;MyClone2

Example 25 SSH

cloneSnapshot snapshotName=Snapshot1 volumeName=MyClone1;MyClone2

configureRaid

Description

Reconfigure the RAID setting on a storage system. The storage system cannot be in a management

group.

24 Commands