11.0 HP StoreVirtual LeftHand OS Command Line Interface User Guide (AX696-96291, September 2013)

Parameters

DescriptionName

The IP addresses or DNS-resolvable names of one or more storage systems.{login}

The authentication user name for the storage system. If you use this parameter,

you must include the passWord parameter with it. Or, you can use the

groupName parameter instead of userName and passWord.

{userName}

The name of the management group. Use this parameter if you do not use

the userName and passWord parameters. Because groupName has cached

credentials, it does not require the userName and passWord parameters.

{groupName}

The password for the storage system. Required when the userName

parameter is used.

{passWord}

The SNMP community string.{communityString}

The IP address or host name of the SNMP server.[ipAddress]

An IP address mask for SNMP notification.[ipMask]

An IP address subnet for SNMP notification.[ipSubnet]

Example 53 Windows

cliq createSnmpCommunityString login=10.0.1.3 userName=admin

passWord=secret ipAddress=10.0.10.25 communityString=NewString

Example 54 SSH

createSnmpCommunityString ipAddress=10.0.10.25 communityString=NewString

createSnmpTrapTarget

Description

Create an SNMP Trap Target. The Community String must be the same for all Trap Targets. If no

Trap Targets exists, the Community String is used, otherwise it is ignored and the Community String

of existing Trap Targets is used.

Syntax

createSnmpTrapTarget {login=} { userName= passWord= | groupName= }

{ipAddress=} {version=} {communityString=}