11.0 HP StoreVirtual LeftHand OS Command Line Interface User Guide (AX696-96291, September 2013)

Example 107 Windows
cliq getDnsInfo login=10.0.1.3 userName=admin passWord=secret
Example 108 SSH
getDnsInfo
getEventLog
Description
Get event information.
Syntax
getEventLog {login=} { userName= passWord= | groupName= } [type=] [format=]
[report=] [time=] [component=] [severity=] [object=] [system=] [source=] [user=]
Parameters
DescriptionName
The IP addresses or DNS-resolvable names of one or more storage systems.{login}
The authentication user name for the storage system. If you use this parameter,
you must include the passWord parameter with it. Or, you can use the
groupName parameter instead of userName and passWord.
{userName}
The name of the management group. Use this parameter if you do not use
the userName and passWord parameters. Because groupName has cached
credentials, it does not require the userName and passWord parameters.
{groupName}
The password for the storage system. Required when the userName
parameter is used.
{passWord}
Event type. Values are AllAlerts, AllEvents, GlobalAlerts, GlobalEvents,
LocalAlerts, and LocalEvents.
[type]
Output format. Values are Remote, Client, and Xml.[format]
Output verbosity. Values are Brief, Standard, and Verbose.[report]
Time filter. The format is YYYYMMDDhhmmss:YYYYMMDDhhmmss.[time]
Component filter. Values are Saniq, Hal, and Sys.[component]
Severity filter. Values are Info, Warning, and Critical.[severity]
Object filter. Values are MgmtGroup, RemoteMgmtGroup, Cluster, Manager,
VirtualManager, Store, SnapshotSchedule, Volume, and Snapshot.
[object]
System filter. Values are System, Controller, Cache, Disk, Boot, Backplane,
Fan, Temperature, Voltage, PowerSupply, and RAID.
[system]
Source filter, source name[source]
The name of the administrative user.[user]
60 Commands