11.0 HP StoreVirtual LeftHand OS Command Line Interface User Guide (AX696-96291, September 2013)

Parameters
DescriptionName
The IP addresses or DNS-resolvable names of one or more storage systems.{login}
The authentication user name for the storage system. If you use this parameter,
you must include the passWord parameter with it. Or, you can use the
groupName parameter instead of userName and passWord.
{userName}
The name of the management group. Use this parameter if you do not use
the userName and passWord parameters. Because groupName has cached
credentials, it does not require the userName and passWord parameters.
{groupName}
The password for the storage system. Required when the userName
parameter is used.
{passWord}
The name of the remote snapshot.[snapshotName]
Determines how much information to return. Values are 0—Get summary
information only (better performance), and 1—Get all information (better
[verbose]
information; default). The greater the verbose number, the longer the call
can take.
Response Syntax
REMOTESNAPSHOT...
DescriptionName
This section contains remote snapshot information.REMOTESNAPSHOT
Example 121 Windows
cliq getRemoteSnapshotInfo snapshotName=TheSnapshot login=10.1.2.3
userName=admin passWord=secret
Example 122 SSH
getRemoteSnapshotInfo snapshotName=TheSnapshot
getScsiInfo
Description
Get SCSI inquiry information about a locally connected volume.
Syntax
getScsiInfo {volumeName=}
Parameters
DescriptionName
The name of the locally attached storage device (for example, E:). This is not
the name of the volume in the management group.
{volumeName}
66 Commands