11.0 HP StoreVirtual LeftHand OS Command Line Interface User Guide (AX696-96291, September 2013)

Example 162 Windows
cliq modifyNSM login=10.0.1.2 userName=admin passWord=secret fcenabled=1
Example 163 SSH
modifyNSM fcenabled=1
modifyRemoteAssociation
Description
Modify a previously created remote volume association.
CAUTION:
• This operation is irreversible.
• This command will display a prompt, requiring confirmation before proceeding. This prompt
may be overridden with an optional prompt=0 parameter on the command line; in this case,
the command will always execute without pausing for confirmation.
Syntax
modifyRemoteAssociation {login=} { userName= passWord= | groupName= }
{remote=} [remoteUserName=] [remotePassWord=] [primaryBandwidth=]
[remoteBandwidth=] [remotegroupname=]
Parameters
DescriptionName
The IP addresses or DNS-resolvable names of one or more storage systems.{login}
The authentication user name for the storage system. If you use this parameter,
you must include the passWord parameter with it. Or, you can use the
groupName parameter instead of userName and passWord.
{userName}
The name of the management group. Use this parameter if you do not use
the userName and passWord parameters. Because groupName has cached
credentials, it does not require the userName and passWord parameters.
{groupName}
The password for the storage system. Required when the userName
parameter is used.
{passWord}
The IP address or DNS-resolvable names of one or more remote storage
system.
{remote}
The authentication user name for the remote group.[remoteUserName]
The password for the remote group.[remotePassWord]
The bandwidth used in a copy from the primary group to the remote group.
Values are:
[primaryBandwidth]
• Kb—Kilobits/sec (1000 Bits/second)
• Mb—Megabits/sec (1000 Kilobits/second)
• Gb—Gigabits/sec (1000 Megabits/second)
modifyRemoteAssociation 85