11.0 HP StoreVirtual LeftHand OS Command Line Interface User Guide (AX696-96291, September 2013)

DescriptionName
The name of the management group. Use this parameter if you do not use
the userName and passWord parameters. Because groupName has cached
credentials, it does not require the userName and passWord parameters.
{groupName}
The password for the storage system. Required when the userName
parameter is used.
{passWord}
The name of the volume in the management group.{volumeName}
Example 190 Windows
cliq removeVolume volumeName=z: login=10.0.1.2 userName=admin
passWord=secret
resetSession
Description
Reset the iSCSI session associated with a volume. Some initiators will attempt to reconnect after
the reset.
Syntax
resetSession {login=} { userName= passWord= | groupName= } {volumeName=}
[initiator=]
Parameters
DescriptionName
The IP addresses or DNS-resolvable names of one or more storage systems.{login}
The authentication user name for the storage system. If you use this parameter,
you must include the passWord parameter with it. Or, you can use the
groupName parameter instead of userName and passWord.
{userName}
The name of the management group. Use this parameter if you do not use
the userName and passWord parameters. Because groupName has cached
credentials, it does not require the userName and passWord parameters.
{groupName}
The password for the storage system. Required when the userName
parameter is used.
{passWord}
The name of the volume in the management group.{volumeName}
A semicolon delimited string of host IQNs. If this is not specified, the IQN
of the local server is used (this parameter is required if run on a storage
[initiator]
system). Valid characters are any letter, number, international character or
-, ., and : characters.
98 Commands