10.5 HP StoreVirtual Storage User Guide (AX696-96269, March 2013)

6. (Optional) Edit the Snapshot Name and Description for each snapshot.
NOTE: Be sure to leave the Application-Managed Snapshots check box selected. This option
maintains the association of the volumes and snapshots and quiesces the application before
creating the snapshots. If you clear the check box, the system creates a point-in-time snapshot
of each volume listed.
7. Click Create Snapshots to create a snapshot of each volume.
The snapshots appear in the CMC. To see the associated snapshots, select a snapshot, click
the Details tab, and look at the Snapshot Set field.
Editing a snapshot
You can edit both the description of a snapshot and its server assignment. The description must be
from 0 to 127 characters.
1. Log in to the management group that contains the snapshot that you want to edit.
2. In the navigation window, select the snapshot.
3. Click Snapshot Tasks on the Details tab, and select Edit Snapshot.
4. Change the description as necessary.
5. Change the server assignment as necessary.
6. Click OK when you are finished.
Scheduling snapshots
Use schedules to create a series of snapshots up to a specified number, or for a specified time
period. After the specified time period, or accumulated number of snapshots, the earliest snapshot
is deleted when the new one is created. For example, you plan to keep a series of daily snapshots
for one week, up to five snapshots. After creating the sixth snapshot, the earliest snapshot is deleted,
thereby keeping the number of snapshots on the volume at five. A schedule can also create a single
snapshot and then delete it when it is no longer needed. Snapshot schedules can also be paused
and resumed.
Scripting snapshots, either recurring or single snapshots, can also take place on the server side.
Scripted snapshots offer greater flexibility for quiescing hosts while taking snapshots, and for
automating tasks associated with volumes and their snapshots.
Best practices for scheduling snapshots of volumes
• If you do not have an NTP server configured, before you create the schedule, you should
refresh the time setting of the management group to ensure that the storage systems are all
set to the correct time.
• Configure schedules to snapshot a volume during off-peak hours. If setting schedules for multiple
volumes, stagger the schedules with at least an hour between start times for best results.
Table 54 Planning the scheduling for snapshots
What it meansRequirement
Scheduling snapshots should be planned with careful
consideration for capacity management as described in
Plan for capacity management
“Managing capacity using volume size and snapshots”
(page 151). Pay attention to how you want to retain
snapshots and the capacity in the cluster. If you want to
retain <n> snapshots, the cluster should have space for
<n+1>.
It is possible for the new snapshot and the one to be
deleted to coexist in the cluster for some period of time.
Scheduling snapshots 169