10.5 HP StoreVirtual Storage User Guide (AX696-96269, March 2013)

Figure 80 SysAdm cluster now has the SmartClone volumes, clone point, and the source volume
Table 59 (page 190) shows the shared and individual characteristics of SmartClone volumes. Note
that if you change the cluster or the data protection level of one SmartClone volume, the cluster
and data protection level of all the related volumes and snapshots will change.
Table 59 Characteristics of SmartClone volumes
Individual characteristicsShared characteristics
NameCluster
DescriptionData protection level
Size
Type (Primary or Remote)
Provisioning (Thin or Full)
Server
NOTE: Snapshot schedules and remote copy schedules are also individual to a single SmartClone
volume.
Clone point
The clone point is the snapshot from which the SmartClone volumes are created. The clone point
contains the snapshot data that is shared among the multiple volumes. Because the SmartClone
volumes and their snapshots depend on the clone point, it cannot be deleted until it is no longer
a clone point. A clone point ceases to be a clone point when only one SmartClone volume remains
that was created from that clone point. That is, you can delete all but one of the SmartClone
volumes, and then you can delete the clone point.
190 SmartClone volumes