10.5 HP StoreVirtual Storage User Guide (AX696-96269, March 2013)

$ xterm
3. In the xterm window, start minicom as follows:
$ minicom -c on -l NSM
Opening the Configuration Interface from the terminal emulation session
1. Press Enter when the terminal emulation session is established.
2. Enter start, and press Enter at the log in prompt.
3. When the session is connected to the storage system, the Configuration Interface window
opens.
Logging in to the Configuration Interface
Once you have established a connection to the storage system, log in to the Configuration Interface.
Table 76 Logging in depends on where the storage system is
From Configuration Interface entry windowIf the storage system is in
Press Enter to log in. The Configuration Interface main menu
opens.
Available Systems pool
Management group 1. Press Enter to log in.
2. Enter the user name and password of the administrative
user created for the management group.
3. Tab to Login, and press Enter.
NOTE: This user is viewable in the CMC under the management group Administration category.
Configuring administrative users
Use the Configuration Interface to add new administrative users or to change administrative
passwords. You can only change the password for the administrative user that you used to log in
to the Configuration Interface.
1. On the Configuration Interface main menu, press Tab to General Settings, and press Enter.
2. To add an administrative user, Add Administrator, and press Enter. Then enter the new user’s
name and password. Confirm password, press Tab to select OK, and press Enter.
3. To change the password for the user that you are currently logged in as, press Tab to select
Change Password, and press Enter. Then enter the new password. Confirm password, press
Tab to select OK, and press Enter.
4. On the General window, press Tab to select Done, and press Enter.
Configuring a network connection
The storage system comes with two Ethernet interfaces. Table 77 (page 245) lists where interfaces
are labeled and the label name.
Table 77 Identifying Ethernet interfaces on the storage system
Ethernet Interfaces
What the label saysWhere labeled
Name:TCP/IP Network configuration category in the CMC
• TCP/IP tab
eth0, eth1
Motherboard:Port0, Motherboard:Port1
• TCP Status tab
G4-Motherboard:Port1, G4-Motherboard:Port2
Logging in to the Configuration Interface 245