10.5 HP StoreVirtual Storage User Guide (AX696-96269, March 2013)

log into management group from one CMC only, 110
minimum configuration for fault tolerance, 147
plugging NICs into same switch for Link Aggregation
Dynamic Mode, 56
resetting storage system to factory defaults erases all
data and configuration information, 247
stop applications and log off iSCSI sessions before
deleting volumes or snapshots, 199
verify that NIC bond works properly, 67
virtual manager requires manual activation, 131
volumes with Network RAID-0 not protected from system
failure or reboot, 147
warnings when using DHCP, 55
when changing management group to normal mode,
119
when to log off before changing iSCSI server settings,
205
where to install Failover Manager, 126, 127
Centralized Management Console, setting up for remote
support, 20
Challenge Handshake Authentication Protocol see CHAP
changing
administrative group description, 82
changing RAID erases data, 33
cluster configuration, 137
clusters, for volumes, 162
data protection levels, 163
DNS domain name, 72
host names, 22
IP address of storage system, 55
local bandwidth, 117
maintenance mode to normal, 119
management groups, 117
network configuration, 50
order of NTP server access, 78
snapshots, 169
thresholds in a snapshot, 169
user password, 80
volume descriptions, 162
volume size, 163
CHAP
1-way, 239
2-way, 239
editing, 205
iSCSI, 239
not required, 204
required, 204
requirements for configuring, 205, 240
terminology in different initiators, 240
using, 239
volumes and, 239
characteristics of SmartClone volumes, 186
checklist for disk replacement, 46
choosing a RAID configuration, 28
clearing statistics sample data, 227
client access to volumes, 16
clients, adding SNMP, 96
clone see SmartClone volumes
clone a volume, 185
clone point
and shared snapshots, 192
deleting, 199
SmartClone volumes, 190
cluster swap, 140
Cluster Utilization Summary, customizing on SAN Status
Page, 87
cluster-level data protection, Best Practice Summary, 114
clustered application servers
changing volume associations after deleting server
cluster, 210
creating, 209
deleting cluster, 210
clustering application servers, 202, 208
clustering managers, 107
clustering servers, 202, 208
clusters
adding, 136
adding storage system, 139
capacity, 136
comparing the load of two, 218, 224
data protection levels, 146
deleting, 143
editing, 137
map view, 137
moving volumes between, 162
overview, 136
removing storage systems from, 140
reorder storage systems within, 140
repairing storage system in, 142
space reporting in, 152
swapping storage systems, 139
System Use window, 154
troubleshooting, 141
usable space in, 154
Use Summary window, 152
viewing capacity and useage of, 151
Volume Use window, 153
communication interface for LeftHand OS software
communication, 74
compatibility matrix, 14
configuration
best practice summary, 113
changing network, 50
configuration categories for storage systems, defined, 21
Configuration Interface
configuring frame size in, 246
configuring network connection in, 245
configuring TCP speed and duplex in, 246
connecting to, 244
creating administrative users in, 245
deleting NIC bond in, 246
resetting DSM configuration in, 247
resetting storage system to factory defaults in, 247
Configuration Summary
customizing on SAN Status Page, 87
monitoring on SAN Status Page, 87
reading for management group, 111
configuring
275