10.5 HP StoreVirtual Storage User Guide (AX696-96269, March 2013)

Adding or changing domain names to the DNS suffix list
Add up to six domain names to the DNS suffix list (also known as the look-up zone). The storage
system searches the suffixes first and then uses the DNS server to resolve host names. You can also
change or remove the suffixes used.
1. On the management group DNS tab, select the DNS suffix to edit.
2. Click DNS Tasks and select Edit DNS Suffixes.
3. Using the Add, Edit, and Remove buttons, make the desired changes to the DNS suffixes in
the list.
4. Click OK.
5. Use the arrows on the Edit DNS Suffixes window to order the servers.
The domains will be accessed in the order they appear in the list.
6. Click OK when you are finished.
Setting up routing
The Routing tab displays the routing table. You can specify static routes and/or a default route.
NOTE: If you specify a default route here, it will not survive a reboot or shutdown of the storage
system. To create a route that will survive a storage system reboot or shut down, you must enter a
default gateway on the TCP/IP tab. See “Configuring the IP address manually” (page 55).
Information for each route listed includes the device, the network, gateway, mask, and flags.
Adding routing information
1. In the navigation window, select a storage system and log in.
2. Open the tree, and select Network.
3. Click the Routing tab.
4. Click Routing Tasks, and select Edit Routing Information.
5. Click Add.
6. Select the port to use for routing in the Device list.
7. Enter the IP address portion of the network address in the Net box.
8. Enter the IP address of the router in the Gateway box.
9. Select the netmask.
10. Click OK.
11. Use the arrows on the routing table panel to order devices according to the configuration of
your network.
The storage system attempts to use the routes in the order in which they are listed.
Editing routing information
You can only edit user-added routes.
1. In the navigation window, select a storage system, and log in.
2. Open the tree, and select Network.
3. Click the Routing tab.
4. On the Routing tab, select the optional route to change.
5. Click Routing Tasks, and select Edit Routing Information.
6. Select a Route, and click Edit.
7. Change the relevant information.
8. Click OK to finish.
Setting up routing 73