HP StorageWorks P4000 G2 Unified NAS Gateway Quick Start Guide (5697-0625, November 2010)

ManualsBrandsHP ManualsStorageHP P4900 G2 6.4TB SSD Storage System

Power on and complete the system

installation

1. Power on the P4000 G2 Unified NAS Solution by pushing the power

button on the front panels (remove the bezel if needed). If using iLO

2, click Momentary Press on the Power Management page to power

on the server, then clic k Launch on the Status Summary page to ope n

the iLO 2 Integrated Remote Console and complete the installation

process.

The storage system starts and displays an HP Network Storage

System installation screen. The storage system installation process

takes approximately 10–15 minutes.

NOTE:

The system comes pre-installed with the Microsoft

Windows Storage Server 2008 operating system. There

is no operating system installation required.

When the syste m installation process nears completion, the Windows

Storage Server 2008 desktop displays the following message: The

user's password must be changed before logging on the first time.

Log on to the system by establishing an Administrator password:

2. Click OK.

3. Type an Administrator password in the New password box.

4. Re-type the Administrator password in the Confirm password box.

5. Click the blue arrow next to the Confirm password box.

6. Click OK.

After the Administrator password has been set, the system completes

the installation process.

7. When prompted, press CTRL+ALT+DELETE to log on to the system.

If using iLO 2, on the iLO 2 Integrated Remote Console tab, click

the button labeled CAD and then click the Ctrl-Alt-Del menu item.

After logging on for the first time, Server Manager is launched. The P4000

Centralized Management Console is accessible through the top-level HP

P4000 SAN Solutions node. Use this software application to configure

and manage P4000 SAN storage directly through the P4000 G2 Unified

NAS Gateway.

Figure 2 P4000 Centralized Management Console (CMC)

Configure P4000 SAN storage and

create the cluster

After completing the P4000 G2 Unified NAS Gateway installation and

logging in, complete the following tasks:

• Create and map P4000 SAN storage to the P4000 G2 Unified NAS

Gateway nodes using P4000 Centralized Management Console

(CMC) software, Microsoft iSCSI Initiator, and Windows Disk Man-

ager.

• Create a cluster consisting of the P4000 G2 Unified NAS Gateway

nodes using Failover Cluster Management software (Start > Adminis-

trative Tools > Failover Cluster Management).

For more detailed information about completing these tasks, see the HP

StorageWorks P4000 G2 Unified NAS Gateway User Guide. Go to

http://www.hp.com/go/p4000, click HP Support and Drivers, select

your HP StorageWorks P4000 G2 Unified NAS Gateway product, and

then click Manuals. If the document is not available, enter HP

StorageWorks P4000 G2 Unified NAS Gateway User Guide into the

Search field.