HP StorageWorks P9000 Application Performance Extender Software User Guide (5697-0984, September 2012)

Figure 39 HP StorageWorks P9000 Application Performance Extender Software screen
.
The text displayed on the HP StorageWorks P9000 Application Performance Extender Software
screen is taken from the AppIntegrations.properties file. So, ensure that the text is not
changed in the AppIntegrations.properties file.
IMPORTANT:
• Only one session of P9000 Application Performance Extender can be active at a time.
• If you close the current session of P9000 Application Performance Extender, wait for at least 15
seconds before you launch another session.
• If you are not able to launch P9000 Application Performance Extender from P9000 Performance
Advisor, verify the following:
• If the P9000 Application Performance Extender management station is active and if the man-
agement station's IP address or DNS name specified in the AppIntegrations.properties
file is correct.
• If the port number specified for P9000 Application Performance Extender in the AppInteg-
rations. properties file is supported by P9000 Application Performance Extender
(default port number: 8080).
If P9000 Application Performance Extender cannot be launched even after you have verified the
above-mentioned, contact your HP representative for support.
Launching P9000 Application Performance Extender from P9000 Performance Advisor90