HP StorageWorks EVA Cluster Extension Software Administrator Guide (T3667-96045, April 2010)

2. Update the PreExecScript, PostExecScript, and PostExecCheck values as needed, and then click
OK.
For more information, see “APPLICATION objects” on page 77.
3. Click Apply to finish your modifications and leave the Properties window open, or OK to save
your changes and close the window.
Setting EVA Cluster Extension resource properties using the MMC
If you are using Server Core or Hyper-V Server, you can manage a cluster remotely by using the MMC
to run Failover Cluster Management.
NOTE:
When you configure EVA Cluster Extension resource properties from a remote management station
through the MMC, which uses the standard Microsoft Properties tab, the properties you enter are not
validated, so you must enter the property values accurately, and verify them against the EVA Cluster
Extension documentation.
When you use this option, you will see the default Microsoft properties page instead of the EVA
Cluster Extension Parameters tab. For more information about using the MMC, see “Remote
management of EVA Cluster Extension resources in a cluster” on page 53 and your Microsoft
documentation.
Setting EVA Cluster Extension resource properties using the CLI
The cluster commands in this section can be used with Windows Server 2003, Windows Server
2008/2008 R2, Server Core, or Hyper-V Server.
The MSCS default properties for a resource can be changed using the following command: cluster
resource resource_name /privprop [object_name=value|"value1 value2 ..."].
Configuring EVA Cluster Extension for Windows44