HP StorageWorks EVA Cluster Extension Software Administrator Guide (T3667-96045, April 2010)

1. Start system-config-cluster.
2. Click the Cluster Configuration tab.
3. Expand the Managed Resources tree.
4. Select the Resources tree.
5. Click Create a Resource to open the Resource Configuration dialog box.
6. Select Script in the Select a Resource Type box.
7. Enter CLXEVA in the Name box.
8. Enter /usr/share/cluster/clxeva.sh in the File (with path) box.
9. Click OK.
10. Select File > Save to save the configuration changes.
The service configuration in /etc/cluster/cluster.conf is updated.
11. Click Send to Cluster to propagate the cluster configuration to the other cluster nodes.
Configure the SMI-S server information
Use clxpmu to configure the SMI-S server login information, and then copy the clxsmiscfg file to
the /opt/hpclxeva/bin directory on all of your cluster nodes. For instructions, see
“clxpmu” on page 96.
Creating an RHCS service using the EVA Cluster Extension shared resource
After you create a shared resource and configure the SMI-S information, create an RHCS service using
the EVA Cluster Extension shared resource.
Configuration overview
1. Create a service at the root of the dependency tree using the EVA Cluster Extension shared
resource created in “Creating an RHCS EVA Cluster Extension shared resource” on page 57.
This ensures that the EVA Cluster Extension resource is the first resource to start in a service. All
other resources in this service should be configured as child resources to EVA Cluster Extension.
Use one of the following procedures:
• Using Conga to create a service, page 59
• Using system-config-cluster to create a service, page 60
Configuring EVA Cluster Extension for Linux58