HP StorageWorks P9000 Cluster Extension Software Administrator Guide (TB534-96009, February 2011)

Configuring the RAID Manager device/copy group details
To configure RAID Manager device/copy group details from the Failover Cluster Management
Parameters tab or the resource configuration tool:
1. Select a value in the P9000 device/copy group menu.
2. Click OK to save your changes and close the window.
Configuring RAID Manager device/copy group advanced properties
The Parameters tab of the P9000 Cluster Extension resource offers basic settings and is used to
enter environment data, such as RAID Manager instances. The more advanced settings can be
accessed through additional buttons in the Parameters tab.
To configure RAID Manager advanced properties from the Failover Cluster Management Parameters
tab or the resource configuration tool:
1. Click the Advanced button to open the Advanced Fence Level Failover Behavior window. The
available settings in this window depend on the fence level used with your device/copy
groups.
• For the DATA fence level, you can update the Data lose mirror and DATA lose data center
values. See “DataLoseDataCenter” (page 87) and “DataLoseMirror” (page 88) for more
information about these values.
• For the ASYNC fence level, you can update the ASYNC takeover timeout value. See
“AsyncTakeoverTimeout” (page 85) for more information about this value.
• For the journal fence level, you can update the Journal data currency on S-VOL and
ASYNC takeover timeout values. See “JournalDataCurrency” (page 89) and
“AsyncTakeoverTimeout” (page 85) for more information about these values.
38 Configuring P9000 Cluster Extension for Windows