Hitachi Dynamic Link Manager Software Users Guide for Windows

= view, completion time = yyyy/mm/dd hh:mm:ss
PROMPT>
Example 9
The following example shows how to display the value of the display-of-
the-physical-storage-system-information setting:
PROMPT>dlnkmgr view -sys -pstv
Physical Storage View : off
KAPL01001-I The HDLM command completed normally. Operation name
= view, completion time = yyyy/mm/dd hh:mm:ss
PROMPT>
Parameters Used When Displaying HDLM Management-target Device
Information
-stinfo
Use this parameter to display information about an HDLM management-
target device (except the Thunder 9500V series, Lightning 9900V series,
Hitachi USP series, Hitachi AMS2000/AMS/WMS/SMS series, HUS100
series, Universal Storage Platform V/VM series, and Virtual Storage
Platform series) that was specified when HDLM was installed.
Table 6-12 HDLM Management-target Device Information on page 6-42
describes the displayed items.
Table 6-12 HDLM Management-target Device Information
Item Description
HDLM management-
target device
Name of the HDLM management-target device (except the
Thunder 9500V series, Lightning 9900V series, Hitachi USP
series, Hitachi AMS2000/AMS/WMS/SMS series, HUS100
series, Universal Storage Platform V/VM series, and Virtual
Storage Platform series)
Setting Status
Setting status of the HDLM management-target device (except
the Thunder 9500V series, Lightning 9900V series, Hitachi USP
series, Hitachi AMS2000/AMS/WMS/SMS series, HUS100
series, Universal Storage Platform V/VM series, and Virtual
Storage Platform series).
on: Enabled
off: Disabled
The HDLM management-target device (except the Thunder
9500V series, Lightning 9900V series, Hitachi USP series,
Hitachi AMS2000/AMS/WMS/SMS series, HUS100 series,
Universal Storage Platform V/VM series, and Virtual Storage
Platform series) can be set when the OS is one of the
following. Otherwise, this item always displays off.
• Windows Server 2003 (x86) SP1 or later
• Windows Server 2003 (IPF) SP1 or later
•
Windows Server 2003 (x64)
#1
•
Windows Server 2008
#2
6-42
Command Reference
Hitachi Dynamic Link Manager (for Windows®) User Guide