Hitachi Global Link Manager Software Installation and Configuration Guide

Item Description
using alphanumeric characters (maximum 256
bytes). This item is mandatory.
@URL startup-URL Specify the URL to be started from the Global Link
Manager GUI (maximum 256 bytes). IPv6 addresses
cannot be used. Specify a host name for an IPv6
environment.
@DISPLAYNAME display-in-links-
dialog-box
Specify the link name to be displayed in the Links
dialog box (maximum 80 bytes). You can specify a
Unicode code point in the range from U+10000 to U
+10FFFF. If you do not specify this item, the value
specified in the @NAME line will be the link name.
@DISPLAYORDER display-order-in-
links-dialog-box
Specify the order of values to be displayed in the
Links dialog box (from -2147483648 to
2147483647). Values specified here are displayed in
ascending order in the Links dialog box.
@ICONURL icon-URL Specify the location of the icon displayed on the side
of the link (maximum 256 bytes). IPv6 addresses
cannot be used. Specify a host name for an IPv6
environment.
@TOOL-END
Ending key of the user setup application file. This
item is mandatory.
The user setup application file is coded by ASCII code. Available character
control codes are CR and LF.
Table 3-11 Example of the User Setup Application File
@TOOL-LINK
@NAME SampleApp
@URL http://SampleApp/index.html
@DISPLAYNAME SampleApplication
@DISPLAYORDER 1
@ICONURL http://SampleApp/graphic/icon.gif
@TOOL-END
Setup When a Firewall Is Used
When a firewall is already configured, if you enable Windows Firewall after
installing Global Link Manager, you need to perform the following setup.
Setup Required for a Network that has a Firewall Configured
If a firewall is already configured between a management server and
management client, or between a management server and management
host, set up the firewall so that each port can be used for communication,
according to the tables below.
3-52
Setting Up Global Link Manager
Hitachi Global Link Manager Installation and Configuration Guide (Web Version)