Hitachi Global Link Manager Software Installation and Configuration Guide

Description Audit Event Severity Message ID
Setting up HDLM The HDLM setting was received
successfully.
6 KAIF50200-I
The HDLM setting could not be
received.
3 KAIF50201-E
HDLM was set up successfully. 6 KAIF50202-I
HDLM setup partially failed. 4 KAIF50203-W
HDLM could not be set up. 3 KAIF50204-E
Setting up alerts Alert settings were received
successfully.
6 KAIF50200-I
Alert settings could not be
received.
3 KAIF50201-E
The alerts were set up successfully. 6 KAIF50202-I
Some alerts could not be set up. 4 KAIF50203-W
The alerts could not be set up. 3 KAIF50204-E
Resetting the number of
path I/O counts and the
number of I/O errors
A request to reset the number of
path I/O counts and the number of
I/O errors was received
successfully.
6 KAIF50200-I
A request to reset the number of
path I/O counts and the number of
I/O errors could not be received.
3 KAIF50201-E
The number of path I/O counts and
the number of I/O errors were
reset successfully.
6 KAIF50202-I
Resetting of the number of path
I/O counts and the number of I/O
errors was only partially successful.
4 KAIF50203-W
The number of path I/O counts and
the number of I/O errors could not
be reset.
3 KAIF50204-E
Enabling or disabling
paths
A request to enable or disable a
path was received successfully.
6 KAIF50200-I
A request to enable or disable a
path could not be received.
3 KAIF50201-E
All paths were successfully enabled
or disabled.
6 KAIF50202-I
Some paths could not be enabled
or disabled.
4 KAIF50203-W
No paths could be enabled or
disabled.
3 KAIF50204-E
#1
3-66
Setting Up Global Link Manager
Hitachi Global Link Manager Installation and Configuration Guide (Web Version)