Hitachi Global Link Manager Software Installation and Configuration Guide

Note: Do not execute two or more hcmds64dbclustersetup commands
concurrently. Do not execute the hcmds64dbclustersetup command and
the hcmds64getlogs command at the same time.
6. If you have been using the function that outputs path availability
information in a report, move the output path availability information
(path status log) to a shared disk. If you have not used the function,
steps 6 to 8 are not necessary. Go to step 9.
To export the path availability information (path status log):
Execute the following command:
Global-Link-Manager-installation-folder\bin\hglamexport /dir
export-destination-folder-name
Use an absolute path to specify export-destination-folder-name. When
you specify an existing folder, make sure that the folder is empty.
The following characters can be used for export-destination-folder-name:
A to Z, a to z, 0 to 9, period (.), and underscore (_). You can also use a
backslash (\), colon (:), and forward slash (/) as the path delimiter. If
you specify a path that includes a space character, enclose the path in
double quotation marks (").
The following shows an example of executing the command:
"C:\Program Files\HiCommand\HGLAM\bin\hglamexport" /dir "C:
\hglam export"
7. Edit the property file (server.properties).
The server.properties file is stored in the following location:
Global-Link-Manager-installation-folder\conf
Change the folder for storing reports to a folder on the shared disk.
For server.pathreport.log_location, specify an absolute path
(maximum of 150 bytes) for the folder that stores reports. Deploy this
folder on the shared disk. To use a backslash (\) as the path delimiter,
you must use two consecutive backslashes.
The following shows a coding example:
server.pathreport.log_location=E:\\HGLAM\\pathreport
8. Import the path availability information (path status log).
Execute the following command:
Global-Link-Manager-installation-folder\bin\hglamimport /report
export-destination-folder-name
Before executing the command, you must either delete the folder that
you specified in step 7 or make sure that the folder is empty.
Caution: If the folder is not empty, subfolders and files in the folder will
be deleted.
For export-destination-folder-name, use an absolute path to specify the
folder in which the data exported by using the hglamexport command is
stored.
4-22
Installing Global Link Manager Clusters
Hitachi Global Link Manager Installation and Configuration Guide (Web Version)