Hitachi Global Link Manager Software Installation and Configuration Guide

9. In the Services panel, open the properties for the following services, and
if Startup Type is Automatic, change it to Manual:
¢
HBase 64 Storage Mgmt Common Service
¢
HBase 64 Storage Mgmt SSO Service
¢
HBase 64 Storage Mgmt Web Service
¢
HBase 64 Storage Mgmt Web SSO Service
¢
HiRDB/ClusterService _HD1
10. If the port number that HiRDB uses has already been changed and is
being used, reset the port number.
When the hcmds64dbclustersetup command is executed, the default
(22032) is set to the port number that HiRDB uses. Therefore, reset the
port number.
Installing a Global Link Manager Cluster on the Secondary Node
1. On the secondary node, perform a new installation of Global Link
Manager.
For details about how to install Global Link Manager for the first time, see
Installing Global Link Manager for the First Time on page 2-5.
Requirements for installation are as follows:
¢
Specify the same installation path as the one specified on the primary
node.
¢
Specify the same folders as those specified on the primary node, for
the folders for storing the databases of Hitachi Command Suite
Common Component and the Global Link Manager server.
¢
For the IP address or host name of the Global Link Manager server,
specify the logical IP address or logical host name of the cluster.
¢
For the SNMP trap destination IP address, specify the logical IP
address of the cluster.
2. Enter the license key from the Global Link Manager GUI.
Use the IP address or host name of the secondary node to access Global
Link Manager. For details on how to specify the license, see
Setting Up
License Information During Initial Login on page 2-26.
3. Use a text editor to create a cluster-configuration file.
The items to be specified in the cluster-configuration file are as follows:
mode: Specify standby.
virtualhost: Specify the logical host name.
onlinehost: Specify the host name of the primary node.
standbyhost: Specify the host name of the secondary node.
An IP address cannot be specified for virtualhost, onlinehost, or
standbyhost. Make sure that the IP address can be resolved from the
host name.
The following shows a coding example in the cluster-configuration file:
mode = standby
Installing Global Link Manager Clusters
4-23
Hitachi Global Link Manager Installation and Configuration Guide (Web Version)