Hitachi Global Link Manager Software Installation and Configuration Guide

Requirements for Installing Global Link Manager Agent
To use DMP or HP-UX multipathing as a management-target of Global Link
Manager, you need to install the Global Link Manager agent on the host.
Before starting to install the Global Link Manager agent, make sure that DMP
or HP-UX multipathing is running.
The subsequent sections describe how to perform installation and removal.
Hitachi Command Suite Common Agent Component is included with the
Global Link Manager agent. Hitachi Command Suite Common Agent
Component needs to be running in order for the Global Link Manager agent to
run. For details about how to start and set up Hitachi Command Suite
Common Agent Component, see
Appendix A, Notes on Using HDLM Version
5.8 or Later, DMP, or HP-UX Multipathing on page A-1.
The following describes the amount of free disk space needed to install the
Global Link Manager agent as well as the storage destination. For details
about host requirements, see
Host Requirements on page 1-13.
Amount of free disk space needed to install the Global Link Manager
agent
The following table lists the amount of disk space needed to install the Global
Link Manager agent.
Table 7-1 Disk Space Needed to Install the Global Link Manager Agent (in
Windows)
Usage
Amount of disk space
needed
Amount of free space needed on the system drive 150 MB or more
Amount of free space needed to install the Global Link
Manager agent
8 MB or more
Table 7-2 Disk Space Needed to Install the Global Link Manager Agent (in
Solaris or HP-UX)
Usage
Amount of disk space
needed
Amount of free space needed in /var/tmp 39 MB or more
Amount of free space needed to install the Global Link
Manager agent
7 MB or more
Global Link Manager agent storage destinations
The following table lists the storage destinations for the Global Link Manager
agent.
7-2
Settings for Using DMP or HP-UX Multipathing
Hitachi Global Link Manager Installation and Configuration Guide (Web Version)